Product Description
HangTong Yacht is a famous yacht brand in China, focusing in small boats (50 inches and below)design and production. HangTong is a sole-subsidiary of Meike International Holding Group, founded in 2011, aims to become the largest small boat producer in China. Our factory loacted in Fujian HuiAn, has the floor area of 400 arces, current annual production capacity up to 200 boats(floor area planning maximum production capacity up to 1000 boats/year). NewZealand Dibley Marine design is a loyal and long-term partner of HangTong Yacht. All our products adapted theVacuum Resin Infusion process (VRI) method in building the fiberglass hull, which increases the strength and improves the lightness of the hull. And all our products are CCS (China) & CE (world) certified.
HangTong has established a huge market share in China and is currently expanding to International market. Distributors and dealers who wish to work with us are welcome.
Price includes engine.
HangTong 46' Luxury Yacht (BOROSE 46) is our branding design. It's highly sophisticated and detailed, aims to fulfill the deisre of luxirous living styles and the business meeting requirements. Below is the detailed Technical Specifications of LY46.
TECHNICAL SPECIFICATION
TABLE OF CONTENTS1. SIZE AND MAIN CHARACTERISTICS2. DETAIL OF THE HULL 3. ENGINES 4. STEERING 5. MOORING 6. EXTERNAL LAYOUT AND STANDARD EQUIPMENT 6.1 FLYBRIDGE
6.2 MAIN DECK AND COCKPIT
7. INTERNAL LAYOUT AND STANDARD EQUIPMENT
7.1 MAIN DECK
7.1.1 LOWER DECK-STD "CLASSIC" LAYOUT
7.1.2 LOWER DECK-CREW QUARTER 7.2 ELECTRICAL SYSTEM8.1 MAIN CHARACTERISTICS
8.2 POWER SOURCES
8.3 LIGHTING SYSTEM AND OUTLETS
8.4 ConTROLS AND ALARMS9. ELECTRONICS10. COMMUNICATION SYSTEM11. ENTERTAINMENT SYSTEM12. BILGE SYSTEM13. FIRE-ALARM AND SAFETY SYSTEM14. FUEL SYSTEM(15. FRESH WATER SYSTEM16. BLACK AND GRAY WATER SYSTEM17. SEA WATER SYSTEM18. AIR CONDITIONING, VENTING AND EXTRACTION SYSTEM19. ELECTRO-HYDRAULIC SYSTEM20. INSULATION21. SAFETY EQUIPMENT22. MISCELLANEOUS23. DÉCOR1. SIZE AND MAIN CHARACTERISTICS | Length overall | 14.230m /46' |
| Hull length | 14.230m /46' |
| Beam overall | 4.330m |
| Beam at main section | 4.250m |
| Draft to keel | 0.867m |
| Draft at full load | 1.060m. |
| Height above waterline | 2.61m |
| Full load displacement | 16t |
| Fuel capacity | 1350L /357 gals |
| Fresh water capacity | 350L /93 gal |
| Waste water capacity | 260L /69 gals |
| Cruising speed (At half load) | 19KN |
| Maximum speed (at half load) | 23KN |
The levels of performance described apply to a standard craft (with standard equipment installed) with clean hull, propeller and rudders. Moreover, it is specified that such levels of performance were achieved under favorable sea and wind conditions (one on the Beaufort scale and one on the Douglas scale); in the case of diverse or less favorable sea conditions performance levels may vary considerably.2. DETAILS OF THE HULLThe structural project of the hull has been carried out according acknowledged Classification Committee (R.I.N.A), which approved the project. This implies a further proof of the structure quality, that is already guaranteed by the most advanced techniques and material used.
VINYLESTER RESIN is used for the first coats of the hand laid-up lamination below the water line. The kind of resin is extremely effective in preventing osmosis thanks to its chemical and physical characteristics. Based on this, HANGTONG is able to offer 1 year warranty against osmosis.
World acknowledged quality isophtalic resin is used for all the stages of the hand laid-up lamination process.
High quality PVC with outstanding mechanical peculiarties is used for main deck and superstructure lamination with sandwich core.
Engine room, collision and bow bulkhead are in fiberglass with sandwich core. All other internal bulkheads are built with advanced composite materials. Keel is deep V type with 17 degree aft deadrise.3. ENGINES Main Engines: Cummins QSB5.9-440HO with ZF85A R:2.5 rpm 3400, Hour meter on engine.
Reversing-reductioning group: ZF 85A, reduction rate 1:2.5
Propeller: NiAl bronze, four blades, designed and built to optimize hull performance and to guarantee good comfort during sailing.
Shaft: AQUA 17 steel, or similar diam.64 mm, supported by brass stands and stern tubes, Tides or equivalent shaft seals.4. STEERING Rudders: AISI 316 steel with suitable surface to ensure easy maneuvers. Rudder holes and pole of the rudders in Marinox 17. Bar and yoke in Cu4.5. MOORING One 17G Poolanker anchor in steel;
50 steel chains (8m of diameter);
One 1000W, 12V, anchor winch on bow inside a proper storage;
Six cleats in total (two in aft, two on bow and two at midship). OTHER SPECIFICATIONS CANNOT BE FULLY SHOWN ON ALIBABA, IF INTERESTED PLEASE ConTACT US.
